Javascript required
Skip to content Skip to sidebar Skip to footer
Home / How to Read a Tape Measure in Mm

How to Read a Tape Measure in Mm

Download Article

Download Article

Are y'all confused past how to read a measuring tape in meters, and what all those lines and numbers mean? Is it your first time navigating the metric system? If so, don't be intimidated⁠—the process can seem complicated at first, but in one case you learn what everything means, you'll be able to record and convert the numbers you want in no time. Though you may be used to using the royal arrangement, near of the earth uses the metric organization⁠—so by learning to read a measuring tape in meters, you're picking up a actually useful skill![1]

  1. 1

    Meters are office of the metric organization. You don't want to read the imperial measurements, so await for the metric side. The metric system is usually the bottom row and will contain smaller numbers, while the imperial system is usually the top row and contains larger numbers. For extra confirmation, you can also bank check for letter labels that say "cm" or "meter"/"m" since those are metric measurements.[2] [3]

    • Not every measuring tape will take letter markings, just if information technology does, they may exist located on the far left.
    • If you lot merely see i row of markings, endeavour flipping the tape measure out over. The other side may contain more than measurement markings.
    • If you can merely encounter majestic measurements or "inch" and "feet"/"ft" labels, you volition want to get a different measuring tape.

    Advertising

  1. 1

    Millimeters are subunits that make up the meter. In the metric row on the tape measure, millimeters are the smallest markings and are not labeled. 10 millimeters make up 1 centimeter⁠—this means you volition see 9 millimeter lines betwixt each centimeter number on the tape measure, since the 10th millimeter line is the next centimeter number.[iv]

    • For example, you should see 9 shorter lines between "v" and "half dozen."

  1. ane

    Centimeters are the adjacent sub-unit leading upwards to the meter. They are the large and numbered markings on the metric row. You lot volition also see a slightly longer line halfway between the centimeter makings. This line indicates the one-half centimeter, which is made of 5 millimeters. It is longer than the other millimeter lines, only shorter than the centimeter lines. Information technology is also not usually labeled.[5]

    • For instance, you should meet a slightly longer line between "3" and "4." This stands for 3 centimeters and v millimeters, giving you 3.5 centimeters.

    Advertizing

  1. 1

    1 meter is made of 100 centimeters. That means that every 100 centimeter lines, you should see the meter marked downwards.

    • For case, you should encounter a label for 3 meters after 300 centimeter lines.

  1. ane

    Now that yous can identify and read metric lines, you're fix to measure! Outset from the far left of the measuring tape, which may be marked with a "0." Look for the mark farthest to the correct that lines up with the border of what you are measuring, and record information technology.

    • For example, measuring 205 centimeter lines will requite you 2.05 meters.
    • Measuring 4 millimeter lines after the two centimeter mark will requite you lot two.four centimeters.

    Advertisement

  1. 1

    If your measurement is more 100 centimeters, yous have already read the record in meters! For case, if you measured 205 centimeter lines, you should accept already recorded ii.05 meters and tin stop here—at that place's no need to make a conversion. However, if what y'all measured is less than 1 meter, you lot will now need to brand a conversion.

    • For example, if you measured an object that was thirteen centimeters and yous desire the measurement to be in meters, you lot'll need to catechumen the centimeter measurement.

  1. one

    Employ this conversion if what you measured is less than ane centimeter. At that place are k millimeters in i meter. So, divide the number of millimeters by 1000 to find out the number of meters.[6]

    • For example, if yous wrote down a measurement of 5 millimeters, divide 5 / g to get 0.005 meters.

    Advertisement

  1. one

    Employ this conversion if what y'all measured is more one centimeter. There are 100 centimeters in 1 meter. Separate the number of centimeters by 100 to find out the number of meters.[7]

    • For example, if you wrote down a measurement of 9.five centimeters, divide 9.5 / 100 to get 0.095 meters.

Enquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Ad

  • Using dissimilar types of tape measures won't bear on this method, as the conversions will remain the same.

Advertizing

Almost This Commodity

Thanks to all authors for creating a page that has been read eight,147 times.

Did this commodity help you?

blossevillecoutiek.blogspot.com

Source: https://www.wikihow.com/Read-a-Measuring-Tape-in-Meters